Some knowledge about hydraulic combined ironworker punching and shearing machine

by PRIMA / Wednesday, 24 August 2022 / Published in blogs

Five characteristics of combined ironworker punching and shearing machine

First, the machine adopts European top processing technology, and the frame is welded and quenched at high temperature, so that the frame has high rigidity and high strength; the tool is treated with special vacuum high temperature to prolong its service life.

Second, the machine is equipped with punching station, channel steel and angle steel shearing station, thick plate shearing station, round steel and square steel shearing station, and angle cutting station. Optional accessories such as punching large holes, sheet bending, channel steel punching, shutters and pipe corner cutting.

Third, it is equipped with five workstations and dual hydraulic workstations as standard. Can work independently at the same time. The machine does not need any level adjustment, it can be used after it is put in place. Optional CNC control system to increase automatic punching and shearing efficiency.

Fourth, using hydraulic transmission, the whole machine has reasonable structure, light weight, low noise, light and reliable, and has overload performance.

Fifth, with the pipe cutting die, it can also cut and bevel the pipe, with high efficiency, cost saving, and beautiful cutting surface.

How to adjust the joint punching and shearing station correctly

The punching capacity ranges from 40 tons to 175 tons, and is equipped with five workstations and dual hydraulic workstations as standard. The combined ironworkerpunching and shearing machine can work independently at the same time. The machine does not need any level adjustment, it can be used after it is put in place. Optional CNC control system to increase automatic punching and shearing efficiency.
The machine is equipped with punching station, channel steel and angle steel shearing station, thick plate shearing station, round steel and square steel shearing station, and angle cutting station.

There are five stations in total. The punching station is equipped with a large table, which can be equipped with a composite punch attachment, and the shearing and chamfering station is equipped with a heavy-duty table. The punching station has a standard throat depth of 305, and can also be equipped with Extended throat depth 625.

And can be used for large-scale steel structure bridges, military, aerospace and other high-demand, high-precision production and construction, can complete a variety of processing punching large holes, pipe cutting and crossing, sheet bending, punching, unscrewable ejector, can be Quick-change mold sleeves, universal lower mold fixtures.

The cross-steel cutter that is not easy to wear, the stroke of punching and shearing stations is adjustable, and various rectangular and V-shaped openings can be processed in the cutting and handing station, station protection device, hydraulic overload protection, central pressure lubrication. Optional punching and shearing machine for large holes, sheet bending, channel steel punching, shutters and pipe corner cutting and other accessories.

What are the precautions for the use of the combined ironworker punching and shearing machine?

What are the precautions for the use of the combined ironworker punching and shearing machine? I believe everyone is aware of the precautions for use, but what should be paid attention to? This is not very clear to everyone, let’s take a look.

The precautions for the use of mechanical equipment can generally be attributed to two points, first, to avoid the loss of equipment and property, and second, to the safety of operators.

According to the safety operation specification of the beveling machine, many aspects need to be done well. There is no primary and secondary content in the safety operation. Therefore, here are some important aspects of the use of the beveling machine for reference.

Make sure that the parts of the entire beveling machine are not out of stock or loose. This is a place that can happen and is not noticed.
When two or more people are in operation, they need to do a good job of coordination
It is not allowed to check or any unsafe operation during operation, and the shutdown adjustment or inspection must be strictly carried out.
If the tube is too long and other situations occur, it is necessary to pay attention to the use of some auxiliary equipment, and try to avoid the possibility of reluctance to use it.
Try to fill in the handover, maintenance and repair documents and stick to them, so that the state and use of the beveling machine can be displayed.
Carry out relevant training or have a certain understanding of the manual. This is the premise of being familiar with the use of various types of beveling machines and the basis for avoiding various problems.
In addition to the equipment itself, attention should also be paid to the power supply. The power supply settings must be confirmed before installation, wiring, startup, operation or any adjustment.