Description

Heavy duty guillotine shearing machines , sheet metal guillotine shear 6m

This series is the upgrades of the Q11Y series.It will come with Computer Numerical Control(CNC) operation system and ball screw,linear guide and servo motor driven back gauge to ensure the position accuracy.The blades for this series have 4 edges using,easy to change the blades.

https://youtu.be/iJ0vINknQFc

Performance characteristics:
1.Integrated steel welded structure,eliminate stress by vibration,with good rigidity.
2.Optional China famous CNC E200PS or Netherlands DELEM DAC360 CNC controller
3.System controlled back gauge and cutting angle and stroke
4.Adopt ball screw,linear guide and servo motor to drive the back gauge with high positioning accuracy
5.Serial linked oil cylinder,so the cutting angle will not change during the operation of the shearing machine
6.With smoothly and swift accumulator return
7.Automatically adjustment of the blade gap,precise,rapid and convenient
8.Adjustable cutting angle to minimize distortion of the plate
9.Motorized back gauge,position display to improve its precision

10.Ball rolling front support in order to minimize scuffing as well as friction resistance

Our machine advantages:
1.Blade rest adopt centroid design,it is well improved the shear surface vertical degree.
In the same industry:In order to reduce the cost,they used to adopt graphic design,the machine can not guarantee that the shear surface vertical degree.
2.Adopt three pivot wheel design,make full use of the lever principle,three pivot distance design reasonable practical,to ensure the quality of the shear face,to ensure the quality of the shear face.
In the same industry:The design of the three pivot without using the lever principle,the distance protection, size is consistent,easy to make the product vertical pivot too much stress and fracture.
3.Shear rate meet 50-60 mm/sec at a faster rate than the same industry products,improve the work efficiency, reduce production costs.
In the same industry:20-30mm/sec
4.Back gauge baffle can make minor adjustments (manual), to avoid the size error, affect the production efficiency.
5.Back gauge baffle and blade rest adopt ball connection,so that parallelism can be adjusted with the lower blade and baffle.
In the same industry:Two design together directly,it is difficult to adjust blade clearance when back gauge causes the error.
6.The blade supporting of worktable is designed humanization,easy to adjust the uniformity of the blade clearance and blade gap.
7.The back fulcrum at the bottom adopts bias shaft design,adjustable the left and right straightness of blade rest to ensure to parallel with bottom blade.

How to choose the machine model?
The main required information is the material,cutting thickness and cutting length.
This series shear is mainly used to cut metal plates with the thickness of 1-50mm and different shearing length.The maximum cutting thickness is only applicable to carbon structural steel plates with the tensile strength of 450 MPa; if it is used to cut metal plates with relatively high tensile strength such as manganese steel, stainless steel, etc., the maximum shearing thickness shall be less. Thus, when using the shear, the thickness of plates shall be strictly controlled by the operators themselves in accordance with the value of tensile strength of plates.The cutting angle of this series is adjustable,it can be adjusted according to different thickness,usually it is widely used for the thickness above 12mm.And usually length is ≥6000mm,this series will be chosen.
Then,according to the thickness of different material,you can choose the suitable length for yourself.With all of these you can go to the technical parameters table to find the right model and details.
If you need further help from us,please contact us through our contact information.

Model	Cutting thickness (mm)	Cutting width (mm)	Stroke (times/min)	Back gauge range(mm)	Cutting angle(°)	Main power (kw)	Dimensions (LWH) (mm)
6*2500	6	2500	16-35	20-600	0.5-1.5	7.5	320015002100
6*3200	6	3200	14-35	20-600	0.5-1.5	7.5	390015802150
6*4000	6	4000	10-30	20-600	0.5-1.5	7.5	470016502250
6*5000	6	5000	10-30	20-800	0.5-1.5	11	570018002380
6*6000	6	6000	8-25	20-800	0.5-1.5	11	670020002650
8*2500	8	2500	14-30	20-600	0.5-2	11	320015502150
8*3200	8	3200	12-30	20-600	0.5-2	11	395017502350
8*4000	8	4000	10-25	20-600	0.5-2	11	470018002480
8*5000	8	5000	10-25	20-800	0.5-2	15	570019502600
8*6000	8	6000	8-20	20-800	0.5-2	15	670019802650
12*2500	12	2500	12-25	20-800	0.5-2	15	325016802250
12*3200	12	3200	12-25	20-800	0.5-1.5	15	398018002550
12*4000	12	4000	8-20	20-800	0.5-2	15	480019502650
12*5000	12	5000	8-20	20-1000	0.5-2	22	580021502700
12*6000	12	6000	6-20	20-1000	0.5-2	30	680024502900
16*2500	16	2500	12-20	20-800	0.5-1.5	22	328018302520
16*3200	16	3200	12-20	20-800	0.5-1.5	22	395019502650
16*4000	16	4000	8-15	20-800	0.5-1.5	22	480019702700
16*5000	16	5000	8-15	20-1000	0.5-1.5	30	580022502870
16*6000	16	6000	5-14	20-1000	0.5-2.5	37	720025503200
20*2500	20	2500	10-20	20-800	0.5-3	30	340022602520
20*3200	20	3200	10-20	20-800	0.5-3	30	410023002700
20*4000	20	4000	8-15	20-800	0.5-3	30	490025002880
20*5000	20	5000	8-15	20-1000	0.5-3	37	590027502980
20*6000	20	6000	6-15	20-1000	0.5-3	37	690028503200
25*2500	25	2500	8-15	20-800	0.5-1.5	37	342024002650
25*3200	25	3200	8-15	20-800	0.5-1.5	37	415025002750
25*4000	25	4000	6-12	20-1000	0.5-1.5	37	490026002950
30*2500	30	2500	6-12	20-1000	0.5-4	55	345026002750
30*3200	30	3200	8-12	20-1000	0.5-4	55	415027002850
30*4000	30	4000	8-12	20-1000	0.5-4	55	490029003100
40*2500	40	2500	4-10	20-1000	0.5-4	55	400029503150
40*3200	40	3200	4-10	20-1000	0.5-4	55	490030503680