Primapress WE67K CNC PRESS BRAKE MACHINE AND LASER PROTECTION
As modern industry pays more and more attention to safe operation, laser protection device has gradually become an indispensable part of the machine.
Taking a press brake machine as an example, (press brake is a kind of used for bending of sheet metal machinery, its main structures include stents, workbench and clamping plate, workbench above bracket, and the workbench is formed by the base and the clamp, the base through the hinge is connected with the clamping plate, the base is composed of shell, the coil and plate, coil placed inside the shell of the sag, the depression at the top of the cover plate. When used, the wire is energized to the coil, and after energized, the pressure plate generates attraction, so as to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into a variety of workpiece requirements, and can be processed on the side wall of the workpiece, the operation is also very simple.)
For safe operation of the bending machine,some customers may choose safety light curtains. In fact, due to the particularity of the machine, many ordinary safety light curtains cannot truly achieve safety protection. The laser protection is a set of bending machine protection measurement system based on the principle of laser detection (electric sensitive protection device). It is composed of transmitter, receiver and bracket. It is a protection system for monitoring and safety protection of the detection area between the transmitter and receiver of the mobile upper working mold or the mobile lower working mold. Once the worker’s finger enters the protection area, the beam will be blocked, so that the press brake machine will stop immediately, thus effectively to prevent the occurrence of finger crushing accidents. Primapress WE67K CNC PRESS BRAKE MACHINE CE Standanrd AND LASER safety PROTECTION
Primapress press brake main recommend MSD and DSP laser protection.
This is primapress press brake with MSD:it’s single-point laser protection, and it has a point, and if you block that point, the machine stops working.
This is primapress press brake with DSP :it is multi-point, there are three main points, these three points are blocked, the machine will stop working,
because DSP is more accurate than MSD, can better avoid accidents.
the normal light safety devices protections
DSP also have another type,named DSP-AP,this is higher precision than DSP. this model can even sense the work of the side guardrail of the bending machine. once a worker opens the side guardrail, the machine will slow down until it stops working.
Certainly,the choice of model depends on the needs of customers. safe production is really important,hope that customers at home and abroad can pay attention to it.