Installation Skills of CNC Plate plate sheet metal bending rolling machine
Primapress brand
Professional manufacturer of CNC bending machines, CNC shearing machines, and CNC plate sheet metal bending rolling machines
plate sheet metal bending rolling machine is a type of equipment that uses work rolls to bend and shape sheet metal. It can form different shaped parts such as cylindrical and conical parts, and is a very important processing equipment.
The working principle of a plate sheet metal bending rolling machine is to use external forces such as hydraulic pressure and mechanical force to move the work rolls, thereby causing the sheet metal to be bent or rolled into shape. According to the rotational motion and position changes of work rolls with different shapes, elliptical parts, curved parts, cylindrical parts, and other parts can be processed. It is also easy to roll thick steel plates into circles.
When installing the plate sheet metal bending rolling machine, we thread the cleaned anchor bolts into the anchor bolt holes of the steel base in order to ensure that the anchor bolts are always connected to the center of the steel base anchor holes.
Due to reasons such as tamping during grouting, the warning anchor bolt deviates from the central orientation of the steel base anchor hole. After screwing on the nut, the screw should expose the original nut 3-5 pitches. The three roller plate plate sheet metal bending rolling machine has the effect of rolling different shaped plates such as O-shaped, U-shaped, and multi segment R.
Lift the base and when the bottom of the anchor bolt is higher than the base, move it above the base. Align each anchor bolt with the anchor hole and gradually drop it, with the end resting on the pad iron. Alternatively, place the anchor bolt into the anchor hole on the foundation and place two sets of track wood in the appropriate position on the foundation.
Lift the steel base above the base, align the center orientation of the two, place the steel base on the track, and sequentially lift the anchor bolts into the anchor bolt holes of the steel base with nuts. Hang the minimum base, remove the track wood, and gradually drop the copper base onto the iron pad. The general will handle the rewards and punishments and draw a steel base called the centerline. Lift it between the steel base anchor hole and the anchor bolt. The diameter of the steel wire pierced into each of the four equal parts of the circumference should be less than the radius of the base anchor hole minus the radius of the anchor bolt. The steel wire exposed on the steel base should be bent horizontally.
