Amada Press Brake toolings , Trumpf press brake bending tools choice
Press brake machine normally needs some bending tools for different bending works.
so normally one press brake have to buy some press brake toolings , including the punch and die .
in the world, Amada Japan and Germany Trumpf are top brand press brake machine manufacturer , also they have the best quality press brake tools.
luckily ,Primapress company can also make the same press brake bending punch and dies.
and for the press brake tools, the best material is 42CrMo.
1, punch and die : material:42 CrMo (best), heating treatment, hardness 45-48.
Remark: 42CrMo = SCM440 = 42 CrMo4= 4140
The Chemical Composition of 42CrMo ,HRC 47+/- 2°
C | Si | Mn | Mo | Cr | S | Ni | Cu | P |
0.38-0.45 | 0.17-0.37 | 0.5-0.8 | 0.15-0.25 | 0.9-1.2 | ≤0.035 | ≤0.3 | ≤0.3 | ≤0.035 |
2, the drawing, Prima can make the drawing according to your products.
3, Advantage of sectional tools:
- Most tools can be easily loaded by a single operator.2. Easy to store
- All sectionalized tools come pre-cut in nine different pieces.
- Most sectionalized punches include two ear pieces (horns)
- Nitrex (HRC-70) is standard on every punch in the tooling line.6. Special tooling available.